APC Netshelter Metered Rack PDU, 0U, Clipsal 56 Series Input, 6x IEC C19 & 36x IEC C13 Outlets

Introduction

Rack PDU 2G, Metered, ZeroU, 32A, 230V, Clipsal 56 series AS/NZ input plug, (36) C13 & (6) C19 outlets

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare software suite.

Main Input Voltage 200 V 208 V 230 V

PDU type Metered

Main Output Voltage 230 V

Number of rack unit 0U

Cable length 3.00 m

Number of cables 1

Provided equipment- Installation guide, Rack mounting brackets, Serial configuration cable

Permissible voltage 220240 V

Max line current 32 A

Input current limits 32 A

Network frequency 50/60 Hz

Number of input connectors 1 clipsal 32A 56P332

Number of power socket outlets- 36 IEC 60320 C13, 6 IEC 60320 C19

Ambient air temperature for operation -545 C

Relative humidity 595 %

Operating altitude 0…10000 ft

Ambient air temperature for storage -2565 C

Storage Relative Humidity 595 %

Storage altitude 0.0015240.00 m

Product certifications VDE

Mounting mode- Not rack mountable

Data Racks & Accessories